SONOREX DIGITEC
The new generation
-
Full convenience in use and display for all bath types
-
Easy to operate - self-explanatory symbols well recognizable parameters,
-
Target as well as actual values - brightly lighting LED-display
-
4-step-operation as "plug and clean"
-
Adjustable temperature range: 20-80 °C, with LED-display for target value and actual value of temperature
-
Optical signal in case of excess temperature
-
Timer for countdown and continuous operation
-
DEGAS: adjustable pulse sound level for removing unwanted air bubbles, visible at LCD-display
-
Automatic short-time ultrasound during heating
-
Up period to avoid delay in boiling - switch-off possible
-
Medical device class I
-
Quality management system according to the requirements of EN ISO 13485
-
Protection class IP 33 at highest possible level through liquid-tight mains cable and housing front without openings.
-
SweepTec for permanent sound field oscillation ensures even and gentle cleaning
-
Automatical safety shut-down 12 hours after last keypress
-
Marking of filling level for safe dosage
-
One-piece welded drain bow
-
Transducers with high efficiency
Light & Radiation Systems
Agriculture Technology & Scientific Instruments Distributor
Dipping Bottles
Dipping bottle with glass container for
sampling in sewage plants, for mud and water samples. For testing crude oil, liquid mineral oil products, fuels, special and test fuels, fuel oils, petroleum and liquid lubricants of Hazard Categories IIA and IIB. Completely made from non-spark producing materials. Dipping frame made of nickel-plated brass, easy-click closure made of electrically conductive polyamide.
-
With Easy-Click, safe and practical closure for a rapid bottle exchange
-
High weight (3.3 kg) for fast lowering
-
Bottle made of transparent glass 1000 ml contents
-
Height with handles 330 mm
-
Please order the appropriate lowering cable at the same time
-
Tested for use in the Ex protection zone 0
Dipping containers are used in various areas to collect liquids for sampling. Bürkle produces the most comprehensive collection of dipping containers by a long way, the right product for every use as it were. Bürkle offers dipping bottles and immersion cylinders forsediments, for the area of environmental issues, for chemically aggressive products, for petrochemistry, for the ex protection area etc.
The dipping bottles for the Ex protection area are made of nickelplated brass, therefore they do not oxidise. Dipping vessels can be used for point sampling, all-layer samples and bottom sampling.
Dipping vessels are heavy. Lowering requires the use of special manually-operated drum reels with a large winding diameter. Other manually-operated drum reels place too much strain on the user’s wrist and could represent a health hazard. Lowering cables and
chains made from different materials, as well as manually-operated drum reels, also for Ex-proof applications, available as accessories
Use
-
Lower the dipping bottle to the required depth.
-
Pull chain/cable with a short, powerful jerk, the stopper opens.
-
The sample flows into the bottle.
-
Raise the bottle with the chain/ cable.
-
Open the Easy-Click closure, remove the bottle.
Observe Ex-proof guidelines when sampling flammable liquids.
Only use conductive lowering cables made of nonspark-producing material and conductive hand reels with grounding connection
